Public understanding of the function of stop signs is one of the most
critical elements in reducing speeding and traffic accidents. The
following information explains the County of Shasta's policy on
intersection traffic controls and the correct use of stop signs:
What is the purpose of stop signs?
The stop sign is used to assign right of way at an intersection and
to make sure that traffic flows smoothly and predictably.
Will a stop sign reduce speeding in my neighborhood?
Because a stop sign is used to assign right of way at an
intersection, it is not an effective means to control speeding. Research
shows that where stop signs are installed as deterrents or speed
breakers, there are high incidences of intentional violations resulting
in accidents.
Will increasing the use of stop signs in my neighborhood, better
control traffic?
As with any traffic control device, overuse of stop signs will cause
many drivers to ignore them, creating a more hazardous situation,
especially in low volume areas, such as residential neighborhoods.
Because a stop sign causes a substantial inconvenience to motorists,
it should be used only where needed. Studies have shown that, sometimes,
after installing a stop sign there is an increase in rear-end
collisions. Also, the stop sign may cause such an inconvenience that
traffic detours through residential streets, parking lots, etc.
A little known fact is that the stop and go traffic resulting from
the placement of stop signs will increase carbon dioxide emissions,
thereby further impacting the air quality in your area.
How can I get a stop sign on my street?
The County's Traffic Division evaluates an intersection, following
State and Federal guidelines, to ensure uniformity in traffic control.
The survey includes reviewing the following criteria:
- Vehicle and pedestrian volumes
- Traffic speeds
- Visibility (sight distance) at the intersection, i.e., trees,
shrubbery, hills, and curves
- Accident history
Experience has shown that improving the intersection visibility by
prohibiting parking near the intersection or removing other sight
distance obstructions, is often more effective in reducing traffic
accidents.
What are the uses for multi-way and two-way stop signs?
Ordinarily, a multi-way stop sign should be used only where the
volume of traffic is nearly equal on both intersecting roads. In
situations where the volume is extremely heavy, a traffic light is more
effective. Also, a multi-way stop sign is often used at an intersection
where signals are urgently needed, but have not yet been installed. The
multi-way sign can be installed quickly to control traffic while
arrangements are being made for the signal installations.
Two-way stop control is used in areas where one street has a much
higher traffic volume than the street it intersects.